uSDX 8 Band SDR All Mode HF SSB QRP Transceiver

Description

Welcome to my shop
Product Overview
uSDX 8 Band SDR All Mode HF SSB QRP Transceiver
Detail
uSDX 8 Band SDR All Mode HF Transceiver
Package :
1x uSDX Transceiver
1x mic
Test video
https://www.bilibili.com/video/BV1YL411p7Rq/?spm_id_from=autoNext
https://www.bilibili.com/video/BV1d64y1975g
uSDX software site:
https://github.com/threeme3/QCX-SSB/tree/feature-rx-improved
Some hardware sites:
https://dl2man.de/
https://antrak.org.tr/blog/projeler/usdx-an-arduino-based-sdr-all-mode-hf-transceiver-pcb-iteration-v1-02/
https://www.qsl.net/py2ohh/trx/usdx/usdx.html
Discussion group: ​
https://groups.io/g/ucx/topics
uSDX is optimized from QCX-SSB open source hardware. The powerful software supports the use of less hardware to complete the SW transceiver and supports the SSB mode (reception quality is very good, transmission quality is slightly worse). In addition, the developer also developed an AM/FM mode for it, but AM/FM is defined as a gift function. Don't expect AM/FM too high.
The hardware has the following features:
Case size : 82.8MM*28.8MM*110MM;
Interaction and display: rotary encoder; MENU+EXIT button; 1602N liquid crystal display; headphone output interface; CAT interface; PTT_OUT interface (used to control external power amplifier); MIC microphone interface; electric key interface; K-head microphone or headset interface (built 5 wire sequence); antenna interface is BNC interface; power interface is 5.5*2.0 specification. Built-in speaker with cavity (general effect).
Support 8 frequency bands:
80-meter band (3.5MHz);
60-meter band (5.3MHz);
40-meter band (7MHz);
30-meter band (10MHz);
20-meter band (14MHz);
17-meter band (18MHz);
15-meter band (21MHz);
10m band (29MHz);
Three TO-92 encapsulated BS170 tubes are used, and the transmitting power is 3-5W (reserve a BS170 and IRF530 pad for DIY upgrades).
Working voltage: 7-13.8V (up to 15V but not recommended, transmission power will decrease if it is lower than 13.8V)
Standby current: <90mA (built-in speaker and volume is 0)/<80mA (external headphone and volume is 0)
The hardware sold this time is the hardware after 3 iterations, and all the known defects have been modified. However, I hope that it maintains the original design as much as possible, so that fans can find more information on the above-mentioned website to facilitate later DIY or Mill. The hardware indicators sold this time meet or exceed the original design. The components are purchased from Lichuang Mall. The PLL uses 0.5PPM TCXO temperature compensated crystal oscillator. The LPF part uses 100V NP0/C0G capacitors, imported powder magnetic rings, and relays. It is an Omron magnetic latching relay.
However, DIY equipment cannot be compared with commercial machines. There may be one or other defects. The choice is acceptance, please be aware.
Other instructions: The op amp chip LM4562 is a genuine disassembly machine; the relay is a genuine disassembly machine from Omron. Please consider carefully if you are concerned. The frequency of the finished machine will be roughly calibrated (error +-10Hz) before shipment. ​
Shipping Policy
Item Location
Payment Mathord
Returns Policy
About Feedback
Shipping Policy
1. We ship your  orders within 1-2  business days after  the payment  received.
2. Item shipped via  Singapore Post or  HongKong Post , It  takes about 7-14  business days (USA,CA,AU,UK).others  country 10-20  business  days(Brzil,India,RU),Exact  delivery time  depends on postal  process.
3. If you do not  receive your item(s)  by 30 business  days,Please feel  free to contact us  via ebay mail system  , we will try our  very best to resolve  any problems with  you
Item Location
Payment Mathord
1. PayPal payment accepted only.
2. Items will be shipped to your eBay address. Please make sure it is correct.
3. Payment must be received 4 days after auction ended.
Returns Policy
1. Customer satisfaction is our top goal. We believe our items are so outstanding. All products are quality checked. They are new and in good condition when shipped to our customers. We are convinced you will be happy with your Purchase.
2. If product is defective or damage upon arrival, or wrong product shipped, please contact us immediately. Returns accepted within 14 days of delivery date and item must be in original new condition, not worn or altered in any way with attached tags & wrap. Otherwise deal is final. Return shipping must be paid by buyer.
3. Please contact us first if you have any problems/questions/concerns. We will be happy to resolve any issues you may have in a cordial and friendly manner.
4. We appreciate your Postive Feedback, and will do the same in return. DO NOT leave negative feedback without first communication with us. Please allow max 2 business days for us to response.
About Feedback
When you satisfied with our product and services please leave us positive feedback.
If a problem occurs, contact us immediately with any email request. Just contact us using the " Ask the seller a question" link on eBay.