-40%
Mediumwave AM Broadcast Band Tunable Ferrite Antenna 530 - 1710 KHz *IMPROVES DX
$ 23.75
- Description
- Size Guide
Description
This sale is for a passive receive MW ferrite antenna for your portable radio covering the mediumwave (AM broadcast band) frequencies from 530 - 1710 KHz. The Sony radio shown in the picture above is used for demonstration only and is NOT included with the antenna.If you have a portable radio, it will likely have a built-in ferrite antenna for receiving mediumwave signals. However, ferrite antennas built into the radios have major weaknesses:
They are usually cheap (shortened) and do not offer best signal recovery for the radio
They do not tune the antenna to match the incoming signal, you can tune the radio, but not the antenna
The internal antenna cannot be rotated without moving the radio
This mediumwave tunable ferrite antenna is a tool for those people who either like to DX on the AM broadcast (mediumwave) band or for those who spend a lot of time listening to AM radio perhaps to their favorite sports channel or talk show.
To operate the tunable antenna, you need to experiment to find out where the internal ferrite antenna is located within the radio. This will likely be done by tuning into a frequency on the radio and then placing this tunable ferrite antenna next to the radio (usually on top of the radio) and then tune the antenna for signal improvement. Once you discover the location of the radio's internal ferrite antenna, placing this tunable ferrite next to that internal antenna will allow you to couple to the radio's ferrite antenna input....wirelessly.
For those people who have an antenna input on their radio (such as a wideband scanning receiver), you can locate this tunable antenna away from the radio....like near a window...for maximum reception. You would just need to attach the radio and the antenna with a length of 3.5mm mono audio cable (not included) and then tune the antenna for maximum signal gain.
Features of this tunable ferrite antenna:
Frequency range of 530 KHz - 1710 KHz
Tunable for maximum signal gain
Compact for easy transport
Easy to use
Does not require batteries...passive
Wireless connection to AM radios
Great signal gain for DXing and improved AM band performance
Low impedance output to connect 50 ohm scanning radios (with mediumwave band reception)
Some examples of handheld radios that may use this antenna:
Icom IC-R10
Icom IC-R20
AOR AR8200
Alinco DJX-2000
Kenwood TH-D74
Yaesu VR-500
Yupiteru MVT-9000
Sony ICF-SW1 / ICF-SW100 / ICF-SW-07 / ICF-SW6700GR & more
Radio Shack/Realistic DX-390 / DX-392 / DX-398 & more
Sangean ATS-803A / ATS-818 / ATS-909
Tecsun Brand radios
Degen Brand radios
any other portable or handheld that receives mediumwave (AM broadcast band) signals
Please use the Ebay shipping calculator to determine your shipping cost. This cost includes proper packing materials for safe delivery and insurance cost against damage or loss.
Those buyers living outside the USA are also welcome to purchase from us. We have shipped to 105 countries during our 22 years on Ebay and we are happy to ship virtually anywhere in the world. You may use the shipping calculator to determine your shipping cost via either priority or express mail.
Please keep in mind that this cost does not include any import, customs, or VAT fees. If you are uncertain of these costs, we ask you to check with your local post office prior to making a purchase from us. Thank you!
Thank you for taking the time out of your busy day to look at our Ebay items!