Icom IC-R2500 Communications Receiver, NOS, complete w/software, never used

Description

For sale is an
ICOM R-2500 DSP Receiver
, it is still in the original box along with the software and manuals.  It
covers
0.01–3299.999 MHz in AM, FM, WFM, SSB, CW, DV
*2
and P25
*3
modes
Note, several people have asked me about the manual operating head that can go with this unit, NO, it is not included, I did not get that when this was acquired.  What you see is what you get, nothing more, nothing less!
Can operate under Windows 98SE / ME / 2000 / XP / Vista™ PCR2500 software CD according to ICOM.
Dualwatch capability
The
IC-R2500
has dualwatch receive capability
*1
, allowing you to receive two bands simultaneously. It covers
0.01–3299.999 MHz in AM, FM, WFM, SSB, CW, DV
*2
and P25
*3
modes
on the main receiver, while
the sub-receiver covers 50–1300MHz in AM, FM and WFM modes
*4
.
*1
Two antennas are required for dualwatch receive.
Diversity receive capability
The diversity receive* mode is useful for mobile operation where the received signal changes continuously. It compares the signal strength and chooses the antenna with the better signal to maintain good sound and receive quality.
* Two antennas are required. Available in FM/DV/P25 mode between 50– 1300MHz only. Diversity reception is not available while using dualwatch.
1000 alphanumeric memory channels
With Icom’s Dynamic Memory Scan, DMS, you have a versatile memory channel management system at your command. The 1000 memory channels can be arranged by service or personal preference in the 21 memory banks. Selectively link the channels together to scan depending on your needs. Programming the memory channels and 6 character memory names is simple with your PC.
Other features
§
Weather alert function
U.S.A. and Canada versions only
§
Optional DSP capability with UT-106
§
VSC (Voice Squelch Control) ignores unmodulated signals or heterodynes
§
IF filter selection for changing IF filter width
§
Noise blanker eliminates pulse type noise
SSB, CW, AM mode only
§
AFC function automatically follows an FM signal when the signal’s frequency drifts
BW: 6kHz or 15kHz
§
IF shift function
SSB, CW mode only
§
30 min – 2 hour auto power off timer
§
Fast/slow AGC setting
§
Short/long squelch delay
§
CTCSS / DTCS tones and duplex mode operation for monitoring a repeater
§
RF attenuator
attenuates 20dB (approx.)
below 1300MHz
§
All IC-PCR2500 functions are available when connected to a PC
§
Cloning function allows you to read/write memory contents from your PC.
Sharing data with IC-PCR2500 is also possible.