50KHz-2GHz Malachite DSP SDR Receiver Malahit DSP SDR Shortwave Radio Receiver

Description

Home
Arduino
Module
Sensor
Chips
About Us
Advantages:
1. 3.5 inch capacitive screen
2. 2-layer board structure, higher performance
3. Adopt a sound unit, 2 vibrating chambers, the speaker (Only one s
peaker
)comes with a sound chamber, the bass sound quality is very full(
Adjustable sound
)
Features:
- DSP SDR Receiver for Malahit
- Capacitive touch screen
- Stlink V2 System
- Default frequency range: 50KHz-2.0GHz
- Demodulation mode: AM, LSB, AM, NFM, WFM,(CW, MIN SNR)
Product Parameters:
1) The radio is built on the principle of SDR-the function is determined by loaded software;
2) Frequency range: from 50KHz to 2.0GHz (
Registered version
)(
No signal between 250-400MHz
)
3) All types of analog modulation: AM, LSB, NFM, WFM; (CW, MIN SNR)
4) Powerful functions: variable filter width, adaptive noise suppressor, threshold noise suppressor, for Noise Blanker, AGC, equalizer;
5) fully functional chip msi001;
6) The powerful stm32H 743VIT6 with a clock frequency of 480 MHz is applied;
7) 3.5-inch display touch screen;
8) Controls: 2pcs; encoders with buttons and touch screen;
9) It is powered by an external TYPE-C interface or battery (Built-in battery 3.7V 3800ma ), which can be charged by TYPE-C.
10) Consumption: 300mA when listening to headphones;
11) The reception on built-in telescope or external antenna is to improve the HF reception on telescope antenna, and an additional board with source follower has been developed. The board will be built into standard receiver design.
12) Connect to computer via USB, which can transfer CAT, IQ and audio.
13) 160 kHz span, with scalability;
14) Sensitivity: Under the condition of up to 250MHz, s/w is 0.3μV = 10dB; due to lack of measurement equipment, so the above measurements were not taken;
15) Due to the characteristics of msi001 chip used, dynamic blocking range is about 85dB.
16) With backlight control;
17) SMA female antenna socket;
18) Size:102
x 72
x 22mm
;
How To Turn ON/OFF?
Power on: press once,
Standby state: press once,
Power off:Long Press and hold until you hear a "dididi" sound.
Package Included:
1 Set of SDR Receiver +A
ntenna
(with Aluminum Alloy Shell)
Note:
- With registration code purchased from the official.
- The motherboard can be powered by TYPE-C charger for Huawei mobile phone. It can be equipped with a long wire as an antenna for easy listening.
- Other items pictured are not included, for demonstration purposes only.
Payment
Shipping
Refund
Payment
We accept PayPal only.
But we only
Accept
your
Ebay Address
,Please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping
Fill your shipping info
Refund
All package need to
wait 30 days
(US only n
eed 7-10 days)
,
Please take care it.Less than 30 days,we can't take a refund
.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.